RC Tanks Australia Forum

Hello,

I have a Turnigy 9XR Pro running ERSKY9XR.221 revb-x firmware. The radio works fine with Orange receivers and transmitter module. I would like to try a FRSKY XJT transmitter module with X8R receivers but am missing the PXX protocol. Is there a way to download and add this protocol? Any help would be greatly appreciated.

Thank you
Michael

Hi Michael

All of the latest releases of ERSKY9X, ER9X, etc. can be found at:

http://www.er9x.com/

There is a version specifically for the 9XR Pro

http://www.er9x.com/ersky9xr_rom.bin

er9x.com is where Mike releases the "official" latest versions. Beta versions can be downloaded from the er9x forum

http://openrcforums.com/forum/viewtopic ... 8080f2aba8

On my version the protocol is labelled "XJT" rather than PXX. You can't download and install protocols any new additions/edits are added to the firmware.

If all the above fails then the ersky9x is the forum to go to as there you will be in direct contact with Mike and the other ersky9x developers

http://openrcforums.com/forum/viewforum ... ca07db5a9e

Cheers
KG

Thanks very much for your help!