RC Tanks Australia Forum

Hey Michelle I'm lazy and no one uses this forum so I'll make use of it :) Below are a collection of bits - full tracks to 4 bar loops of verse or chorus. Don;t know what would be best for you to work with. Can edit - just let me know. Also just ignore the titles - usually just take name from a synt...

Get your Zeltbahn in svg format here
Have fun and remember it is not a swastika

Sorry Folks that this has taken a while..... Thanks to a very helpful customer in Denmark the MAKO code has now been updated to address the issue of the Taigen V3 MFU not registering hits. It was a simple change of a single number in the entire code. Consequently, the update is a simple single file ...

In reply The Servoe, takes a 0-100 pulse signal input and creates a -100 to +100 continuously cyclic pulse signal output correct? (I'm a mechanical guy, not electrical, so my wording may be off). No you are completely incorrect. If set to recoil servo function if sirvoe detects a +100 it will start ...

Apparently if you mod a standard servo to continuous rotation and remove the servo control pcb you can get a resemblance of recoil by simply plugging the servo motor into the BB motor output. You must also design you own recoil system for the cyclic motion of the servo AND then reattach the micro sw...

Hi All

If your tank is working 100% and you are happy with it then MAKO install is mind numbingly simple. Here is how.. Cheers
Kevin G

Below is a 5 minute video on how to install your MAKO TK
Cheers

Hi All Ok here is a very quick guide on how to bypass the microswitch trigger on your Heng Long/ Taigen bb or recoil unit. This microswitch triggers the actual firing procedure on the Taigen/Heng Long MFU's. The problems is that this switch does not close as soon as you go to fire using the hand con...

HI There There should be no problems doing what you want to do AS LONG AS the replacement joysticks operate the same way as the radio gimbals. Your first example joystick from element14 would not work as it is a switch operating unit. There are 4 independent switches which means there is only ON/OFF...

This is a guide on setting up MAKO for the new TK6.X units from Heng Long. http://rctanksaustralia.com/images/mako/makotk6.jpg Before we begin it is imperative to take into consideration a number of things: 1. You know that bit on every product disclaimer saying something like - "product specificati...