RC Tanks Australia Forum

Here are all the files - both for Asp and for SmartSmoke - there are 2 versions one for fans and one for pumps. Since fans include the Burn Effects there are automated heater turn off times to help save the element.

Hi Pete

Yep there is a release code for SS and fan/heater based smoke units. It requires an update of the ICs on Asp also so that the smoke will heat up from power on. I'll post it in this thread later today.

Cheers
KG

Whilst it is not Asp3, the 2.5 version is the forerunner so here are the changes so far... Major changes: No Airsoft support - zero, nada, none Assumes that you are starting from scratch and that Heng Long/Taigen electrics do not exist CPPM and S.Bus ONLY No onboard switches - all changes made via r...

Hi There Unfortunately, there comes an end to all things and going back to redo old codings for sirvoe or Asp is one of those things. Sirvoe code is open source of sorts - so anyone can get into it if they wish. However, a simple resistor of say 1K (or maybe less) will be able to achieve at least so...

Hi There

Do a google search for "how to install er9x on turnigy 9x"

Cheers
KG

Hi Rad Yes just keeping the splash screen - basically so that I know I've messed with the radio :) Yes that way of control you suggest would be the best way of driving and certainly would provide the greatest amount of speed control. Basically you are doubling the control range. Programming would no...

If you are into your tanks you may know that in WW2 the Germans used a hydraulic system to control the rotation of the turret which was driven by a "power take-off" from the main engine. This meant that the power traverse could only operate if the main engine was running and just as importantly full...

Bulldog and Stug out for a Sunday drive....
.

Hi All For years I have been going on about using your 9X series/Taranis radio to control the momentum/inertia features for your tank but never really explained how or had those features in any template or model file. My bad - time to fix the situation. If you have ER9X or ERSKY9X then as you know I...

Momentum is always a problem I agree - kids or no kids. I want the ability to stop at an instant too. That is why the last version of the Asp firmware there are a whole lot of new things on CH7. If there is a 6-pos switch installed you get: MG1 @ -100 MG2 @ - 75 MG3 @ -50 AP (2 shot kill IR) @ +50 I...