| RC Tanks Australia Forum http://rctanksaustralia.com/forum/ | |
| Asp - NEW - Test Mode http://rctanksaustralia.com/forum/viewtopic.php?f=164&t=1022 |
Page 1 of 1 |
| Author: | Phyrephish [ Mon Aug 31, 2015 7:40 pm ] |
| Post subject: | Asp - NEW - Test Mode |
A demonstration of the testing program on Asp. For both QC and trouble shooting test mode can be accessed on startup to ensure that many of the functions and connections to Asp are correct. A diagnostic LCD can be connected to the Recoil Servo port to help guide through the process. To enter test mode 1. Connect all motors and LEDs for testing to Asp 2. Remove Juno 3. Place bind plug across appropriate pins on Juno connection (see video) 4. Connect LCD (optional) 5. Put Asp into IR mode (switch up) 6. Power up Asp NB: Testing mode will involve the motors spinning so make sure that your tank is up off the ground and that the turret is pointing forward. Cheers Kevin G |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ | |